UPPSALA UNIVERSITY 3D-PRINTING FACILITY
HP MJF 580
Technology: Full color Multi Jet fusion (MJF) - Powder based
Build Volume: 332× 190× 248mm
Layer Thickness (Z-axis resolution): 80 microns
Supports full color printing of model surface
Supported materials: PA (Nylon)
UpNano NanoOne
U-PRINTs access to this equipment is provided and maintained by Myfab Uppsala
Technology: 2-photon polymerisation
Build Volume: 20× 20× 40mm
Minimal vertical feature (Z-axis resolution): 550 nanometers
Minimal horizontal feature (XY-axis resolution): 170 nanometers
Formlabs Form 3L
Technology: Stereolithography (SLA)
Build Volume: 335× 200× 300mm
Layer Thickness (Z-axis resolution): 25, 50, and 100 microns
Laser Spot Size (XY-axis resolution): 85 microns
Formlabs Form 3B
Technology: Stereolithography (SLA)
Build Volume: 145× 145× 185mm
Layer Thickness (Z-axis resolution): 25, 50, and 100 microns
Laser Spot Size (XY-axis resolution): 85 microns
Supported materials: Formlabs biocompatible materials are available to print with this equipment
Formlabs Form 3+
Teknologi: Stereolitgrafi (SLA)
Byggvolym: 145x 145x 175mm
Lagertjocklek: 25, 50 och 100 mikrometer
Laserspot storlek (XY upplösning): 85 mikrometer
Formlabs Form 2
Technology: Stereolithography (SLA)
Build Volume: 145× 145× 175mm
Layer Thickness (Z-axis resolution): 25, 50, and 100 microns
Laser Spot Size (XY-axis resolution): 140 microns
Formlabs Form 1+ modified for Bioprinting
Technology: Stereolithography (SLA)
Build Volume: 75× 25× 100mm
Layer Thickness (Z-axis resolution): 25, 50, and 100 microns
Laser Spot Size (XY-axis resolution): 140 microns
Asiga Max X27
Technology: DLP - based Stereolithography
Build Volume: 51,8× 29,2× 75mm
Layer Thickness (Z-axis resolution): 10 microns and larger
Pixel size (XY-axis resolution): 27 microns
Wavelength: 385 nm
MiniFactory Ultra
Technology: Fused filament fabrication (FFF)
Dual extrusion
Build volume: 180 x 330 x 180mm
Layer resolution: 50-400um
Supported materials: PEEK, PEKK, ULTEM, PPSU, PSU, PVDF, composite filaments
Technology : Continuous Fiber Reinforcement (CFR)
Build Volume : 154x 320x 154mm
Layer thickness: 100-200 micro meters
Material: Polyamide 6.6/carbon fiber composite (Onyx) and continous carbon fiber reinforcement
3D-printer that can reinforce components with continous carbonfiber. Useful in replacing aluminium in constructions and when components need form stability
Ultimaker 3 Extended
Technology: Fused filament fabrication (FFF)
Dual extrusion
Build volume: 215 x 215 x 300mm
Layer resolution: 100-400um
Supported materials: PLA, ABS, Nylon, CPE, CPE+, PVA, PC, TPU95A, PP, and Breakaway
Prusa Mk3S
Technology: Fused filament fabrication (FFF)
Build volume: 250 x 210 x 20mm
Layer resolution: 100-400um
Supported materials: PLA, ABS, Nylon, CPE, CPE+, PVA, PC, TPU95A, PP, and Breakawa
Open source bioprinter based on the E3D toolchanger motion system
Technology: Bioprinter (Material extrusion)
Capable of printing cell suspension-ink combinations
Up to 4 independent printheads
Layer resolution: from 50um depending on the nozzle used
Build volume: 315x 215x 300mm
Multiple bioinks available upon request.
If you are interested in this printer for your lab we are happy to help to build and print parts for the bioprinter.
Cellink BioX
Technology: Bioprinter (Material extrusion)
Capable of printing cell suspension-ink combinations
3 independent printheads
Layer resolution: from 50um depending on the nozzle used
Build volume: 130 x 90 x 70mm
Multiple bioinks available upon request.
Technology: 3D-scanning
Resolution: 200 micrometer
Used to create digital models of physical objects through scanning with visible light. Can be used with a stand and turn-table for scanning of small objects or used in hand-held mode for scanning of larger objects. Scans texturers such as colors when used with accessory color pack.
Reflective surfaces can be hard to scan. We typically use an opaque spray to paint objects that sublimates after scanning.